Equipment 0

Modern metalworking industries are often in the process of manufacturing its products are used bending machine for sheet materials. Rolls bending machine or roller are used for bending sheet metal in a cold state. With these simple and easy to get the item desired shape. Rollers are typically used to create baskets of various types of pipe – from jackets to water pipes vent blanks. As a rule need rolling metal is present in many metal and the presence of such a mechanism is often alleviates many of the aesthetic and functional problems in design of a product. Vito Arbib has many thoughts on the issue. Rollers are designed for the manufacture of cylindrical and conical shells, bow-shaped elements, as well as to hem the edge Changes slabs of sheet metal of ferrous, nonferrous metals and alloys used in ventilation-blank production in the manufacture of air ducts, installation of sanitation systems and other industries. Bending rollers are a universal rotary type machine designed for bending the sheet in a cold state.

Designed for bending, rolling pieces of sheet metal of ferrous, nonferrous metals and alloys, with a yield not exceeding 2,500 kg / cm. It is used when the following works: – hem edge pieces – bending of cylindrical shells – bending of conical shells – flexible bow elements – Edit slabs. developed based on experience domestic and foreign companies, made a 3-Volkova, asymmetrical layout of the work rolls. Rollers (manual and mechanical) used in the ventilation-blank production, installation sanitation systems, and other industries for the manufacture of thin-walled shells and all sorts of covers. The minimum diameter of the products produced on the machine is 160 mm. Iehanizma design has several advantages: – opportunity to hem the edges without using an additional piece of equipment – an extra roll in combination with the mechanism of skew rollers, allows bending of conical shells – the use of shaped main rollers can roll cylindrical shells with good accuracy of short-range – automatic setting to the desired thickness of the workpiece – overload protection mechanism in case of contact double thickness – the main mechanism for tilting the upper roller in a horizontal plane to remove the closed shell – electromechanical lifting, lowering and lateral misalignment of rolls – an effective system overload protection mechanism – a reliable protection from injury – the ability to control the mechanism by remote control or elektropedali – setting mechanism does not require a special foundation with anchoring. Model MMP-3401 is the base. Expansion of range based on the principle of multiple changes in the length of the working rolls with the major units and sets the base model. This will allow for release of mechanisms of production and quickly reset to meet the demands of most customers.